Accelerating Obd Ii Pid Mode Procedure - Mazda B-Series 1997 Workshop Manual

K
ON-BOARD DIAGNOSIS SYSTEM
PIC
DATA MONITOR AND RECORD
ACTIVE COMMAND MODES
DIAGNOSTIC TROUBLE CODE LIBRARY
SELECT ITEM AND PRESS TRIGGER TO START
5. Select active command modes.
6. Select output control.
7. Turn key ON. Press start and trigger. Follow operating
instructions from the menu.
VEHICLE & ENGINE SELECTION
DIAGNOSTIC DATA LINK
VIEW RECORDER AREAS
DIGITAL MEASUREMENT
GENERIC OBD I 1 FUNCTIONS
I 1
MF1692-B
7BUOKX-005
Accessing OBD II PID Mode Procedure
CLEAR DIAGNOSIS CODES
Note
Start engine and bring up to operating temperature
before running Quick Test.
After Repair Procedure
1. After repairs have been made connect SST (NGS) to data
link connector.
2. Select Clear Codes function and clear DTCs.
3. Perform Continuous Memory DTC procedure to ensure
customer's concern has been resolved. If DTC P I 000 is
present, OBD-ll monitoring has not been completed.
Refer to Section FT.
1.
Hook up SST (NGS).
2.
Select vehicle and engine selection menu.
3. Select vehicle year and model.
4. Select diagnostic data link.
5. Select PCM.