Transmission Oil Inspection; Transmission Oil Replacement - Mazda B-Series 1997 Workshop Manual

TRANSMlSSlON OIL
TRANSMISSION OIL
INSPECTION
Note
Park the vehicle on level ground.
1. Remove the oil level plug and washer.
2. Verify that the oil is near the bottom of the plug port.
3. If the oil level
IS
low, add the specifled amount and type of
011
through the oil level plug hole.
4BUOJ1-006
Specified oil
Grade:
M E R C O N ~
or M-Ill
4. Install a new washer and the oil level plug.
Tightening torque:
40-58 N.m (4.1-5.7 kgfam, 3 0 4 2 ft-lbf}
REPLACEMENT
1. Remove the drain plug and washer.
2.
Drain the oil into a suitable container.
3. Install a new washer and the drain plug.
Tightening torque:
40-58 N.m (4.1-5.7 kgf.m, 3 0 4 2 ft.lbf)
OIL LEVEL
PLUG
DRAIN PLUG
MJ1157-A
4. Remove the oil level plug with washer and add the
specified amount and type of oil through the oil level plug
hole until the level reaches the bottom of the oil level plug
hole.
Specified oil
Grade:
M E R C O N ~
or M-Ill
Capacity: 2.65 liters (5.6 US pt, 4.5 Imp pt}
5. Install a new washer and the oil level plug.
4BUOJ1-007
Tightening torque:
40-58 N.m (4.1-5.7 kgf-m, 3 0 4 2 ft.lbf}