Crankshaft Pulley Installation Bolt Installation Note; Cylinder Head Cover Installation Note - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
1 (nuts) : 44-61 N·m {4.5-6.2 kgf·m, 33-44 ft·lbf}
2 (bolts) : 74.5-104.9 N·m {7.60-10.70 kgf·m, 55.0-77.3 ft·lbf}

Crankshaft Pulley Installation Bolt Installation Note

1. Fix the crankshaft pulley using the SSTs.
2. Tighten the crankshaft pulley installation bolt.
Tightening torque
157-167 N·m {16.1-17.0 kgf·m, 116-123 ft·lbf}

Cylinder Head Cover Installation Note

1. Apply silicon sealant as shown in the figure.
Thickness
2-6 mm {0.08-0.23 in}
Length
6-26 mm {0.24-1.02 in}
2. Tighten the cylinder head cover installation bolts in the order shown in the figure.
Downloaded from https://carmanualshub.com/ - automotive repair manuals website