Valve Seals Removal (3.0L); Cylinder Block (External Parts) Disassembly (3.0L); Flywheel Removal (3.0L); Drive Plate Removal (3.0L) - Mazda B-Series 1997 Workshop Manual

DISASSEMBLY
Valve seals
Remove the valve seals.
Note
The three intake valve seals are different from the
three exhaust valve seals.
Identify all valve parts as to which cylinder they
were removed from and whether it i s intake or
exhaust.
Exhaust valve seal: Red band
Intake valve seal: Silver band
CYLINDER BLOCK (EXTERNAL PARTS)
1. Remove the clutch cover and the clutch disc (MT). (Refer to Section H.)
2.
Remove the flywheel (MT), referring to Disassembly Note. (Refer to below.)
3. Remove the drive plate (AT), referr~ng to Disassembly Note. (Refer to below.)
4.
Remove the oil pump with the intermediate shaft, referring to Disassembly Note. (Refer to page B2-31.)
5BUOB2 071
Disassembly Note
Flywheel (MT)
Remove the bolts and the flywheel.
MB1166
A
4BUOB2 089
Drive plate (AT)
Remove the bolts, reinforcement plate and the drive plate.