Timing Chain Cover Removal (4.0L); Timing Chain Cover Installation (4.0L); Crankshaft Position Sensor Installation; Crankshaft Pulley Installation (4.0L) - Mazda B-Series 1997 Workshop Manual

TIMING CHAIN COVER
Timing chain cover
1.
Remove the timing chain cover bolts and studs.
2.Tap lightly with a plastic hammer to remove the timing
chain cover.
Installation Note
Timing chain cover
1. Apply a bead of sealant to the timing chain cover.
2.
Install the timing chain cover.
3. Tighten the timing chain cover bolts and studs as shown.
Tightening torque:
17-21 N-m (1 -8-2.0 kgfem, 13-1 5 ftdbf)
Bolt length:
Bolt A: M8 x 47
Bolt B: M8 x 25
I
I
MBIO~~-A 4 8 ~ 0 8 3 - 0 5 2
Stud C: M8 x 25
I
1
Crankshaft position sensor
1. Install the crankshaft position sensor
2.Tighten the bolts.
Tightening torque:
9-12 N-m (0.9-1.2 kgf-m, 6.6-4.8 ft.lbf)
3. Connect the crankshaft position sensor connector
I
1
MB1068-A 4BUOB3-053
Crankshaft pulley
Install the crankshaft pulley using the SST
Note
SST number: 49 UNO1 002 Crankshaft Damper
Replacer
4BUOB3-054