3.18.3 BY-PASS PICK-UP ROLLER AND PAPER FEED UNIT PICK-
UP ROLLER
It is possible to replace the by-pass or paper feed unit pick-up rollers only. Perform
the following procedures only if it is necessary to replace the by-pass pick-up roller
or the paper feed unit pick-up roller.
By-pass pick-up roller
[B]
[A]
1. Release the white catch and the slide locking piece as far to the side as
possible.
2. Slide the white collar [A] as far to the side as possible.
3. Slide the by-pass pick-up roller [B] as far as possible to the side, until it is free
from the white collar.
4. Rotate the pick-up roller around the drive shaft until it can be removed.
SM
PICK-UP ASSEMBLY AND SOLENOID
B273R973.WMF
3-47
B273