Lamp Stabilizer Board And Exposure Lamp; Original Width/Length Sensor - Ricoh K-C3 Service Manual

B245/B276/B277/B268/B269 Service Manual

Lamp Stabilizer Board And Exposure Lamp

1. Operation panel (
2. Exposure glass (
3. Slide the first scanner to a position where the front end of the lamp is visible.
4. Place one hand under the lamp stabilizer board [A] and release the hook [B].
5. Lamp stabilizer board (
6. Press the plastic latch [C] and push the front end of the lamp toward the rear.
7. Lamp [D] (with the cable)

Original Width/Length Sensor

1. Exposure glass (
2. Original width sensor [A] (
3. Lens block (
4. Original length sensor [B] (
p.53)
p.59)
x 2)
p.59)
x 1, x 1)
p.59)
x 1, x 1)
18-Jan-06
61