The Machine Is Not Functioning As Designed - Muratec MFX-2530 Operating Instructions Manual

The machine is not functioning as designed

Symptom Check for/What to do
The shows nothing. Is only the
LCD ENERGY SAVING
The machine is in the Energy Saver mode. Press any key
on the control panel to cancel.
. . . or . . .
The power switch is turned OFF.
Turn the power switch ON.
. . . or . . .
The contrast volume is turned to the excessively light
LCD
or dark position.
Viewing the
LCD
sary.
Control panel keys Is only the
ENERGY SAVING
do not respond. The machine is in the auto power off mode.
Press
ENERGY SAVING
. . . or . . .
The power switch is turned OFF.
Turn the power switch ON.
The machine is not The power cord is left unplugged from the power outlet.
activated when the Plug the power cord into the power outlet.
power switch is turned
ON.
Misfeeds occur Paper size setting is incorrect.
frequently. Set the correct paper size.
Some of the selected Selected functions cannot be combined.
functions are Check the combination of functions. (See "Combination
unavailable. chart," pages
In EraseBorder or Margin is too wide. Or, margin of your document is too
EraseCenter mode, narrow.
parts of the original Set the narrower margin.
image are not copied.
key lit up green?
, adjust the contrast volume as neces-
LCD
key lit up ?
LED
key on the control panel to cancel.
.4– .5.)
AI AI
Symptom Check for/What to do
In Combine mode, Your set originals are not identical in size and direction.
parts of the image are It is impossible to combine originals as they are not
not copied or parts identical in size and direction. Copy these originals with
of the copy paper are the same size paper, set copies which are identical in size
blank. and direction, and then select Combine.
In Combine mode, Your originals are set in incorrect order.
order of copies is not When you set a stack of originals in the
correct. must be on top.
When you set an original on the
first page to be copied.
In Duplex copy mode, Your originals are set in incorrect order.
order of copies is not When you set a stack of originals in the
correct. must be on top.
When you set an original on the
first page to be copied.
Just in case
, the first page
ADF
glass, start with the
FBS
, the first page
ADF
glass, start with the
FBS
5.15