04/SHOCK ABSORBER, SWINGARM
Rear shock absorber - assembling the damper
8.39
–
Mount rebound damping shim stack
–
Mount sleeve
201074-10
–
Mount compression damping shim stack
201075-10
–
Grind piston
–
Clean the piston.
–
Mount the piston.
Guideline
View
View
201076-10
–
Mount the lower rebound washer
Info
The washer centers the lower rebound washer.
–
Mount the upper rebound washer
–
Mount and tighten nut
Guideline
Nut, piston rod
201077-10
–
Assemble the piston rod of the rear shock absorber. (
–
Slide the spring and piston onto compression damping adjuster
–
Lubricate the O-rings.
Lubricant (T158) (
–
Lubricate the thread.
Lubricant (T159) (
–
Mount and tighten compression damping adjuster
Guideline
201078-10
Compression damping adjuster
with the smaller shims at the top.
.
on both sides on a surface plate using 1200 grit sandpaper.
and washer
.
.
p. 225)
p. 226)
with the smaller shims at the bottom.
Top view of piston
Bottom view of piston
.
M10x1
30 Nm
(22.1 lbf ft)
p. 51)
.
.
M31x1
50 Nm
(36.9 lbf ft)
52