Table of Contents
Advertisement
31/CARBURETOR
Checking/adjusting the carburetor components
21.9
–
Disassemble the carburetor. (
–
Check/adjust the accelerator pump. (
–
Check the choke slide. (
–
Check the jet needle. (
–
Check the throttle slide. (
–
Check the needle jet. (
–
Check the float needle valve. (
–
Check/adjust the float level. (
–
Check/adjust the throttle slide opening. (
–
Check the throttle position sensor. (
–
Assemble the carburetor. (
Checking/adjusting the accelerator pump
21.10
p. 167)
p. 170)
p. 171)
p. 172)
p. 172)
p. 173)
p. 173)
p. 174)
p. 173)
p. 171)
p. 175)
Condition
The carburetor and accelerator pump have been removed.
–
Check the membrane of damage or brittleness.
»
If the membrane is damaged or brittle:
–
–
Check holes
»
If the holes are not free:
–
700051-10
Change the membrane.
to ensure that they are free.
Clean the holes.
Carburetor cleaner (
p. 225)
170
301703-01
Advertisement
Table of Contents
