61/ATV FRONT END
A-Arm bottom - changing the bearing
27.11
Info
The operations are the same on the left and right sides.
–
Remove the A-arms. (
p. 198)
–
Loosen nuts
600470-10
–
Screw the nuts on the new heim joints. Mount the heim joints
600471-10
–
Insert the tool
Camber gauge (83019014000) (
–
Align marking
Info
Nuts
–
Install the A-arms. (
600472-10
. Remove heim joint
. Screw the nuts off of the heim joints.
in the heim joint and clip onto the A-arm.
p. 235)
with the upper edge of the A-arm by rotating the heim joint.
are tightened when the A-arm is installed.
p. 199)
201
.