04/SHOCK ABSORBER, SWINGARM
Servicing the rear shock absorber
8.28
Danger
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided.
Rear shock absorber - removing the spring
8.29
Condition
The shock absorber has been removed.
–
Remove the spring from the rear shock absorber. (
–
Disassemble the damper of the rear shock absorber. (
–
Disassemble the piston rod of the rear shock absorber. (
–
Disassemble the seal ring retainer of the rear shock absorber. (
–
Checking the damper of the rear shock absorber. (
–
Assemble the seal ring retainer of the rear shock absorber. (
–
Assemble the piston rod of the rear shock absorber. (
–
Assemble the damper of the rear shock absorber. (
–
Install the spring of the rear shock absorber. (
201216-01
Condition
The shock absorber has been removed.
–
Clamp the shock absorber in a vise using soft jaws.
–
Measure and note down the spring length in the preloaded state.
–
Release counter ring
–
Turn adjusting ring
Hook wrench (T157S) (
201046-10
–
Remove ring
–
Remove spring retainer
–
Remove spring.
201047-10
.
until the spring is no longer under tension.
p. 239)
.
and washer
.
p. 44)
p. 45)
p. 46)
p. 47)
p. 48)
p. 50)
p. 51)
p. 52)
p. 57)
44