61/ATV FRONT END
Removing the A-arms
27.8
Info
The operations are the same on the left and right sides.
–
Insert the tie rod in the wheel carrier. Mount and tighten nut
Guideline
Nut, tie rod end
301502-11
–
Thread the brake caliper and position it.
400691-11
–
Mount and tighten screws
Guideline
Screw, front brake caliper
–
When both Brake calipers have been mounted, activate the hand brake lever several
times until the brake linings are in contact with brake disc and there is a pressure
point.
301501-11
–
Position brake line guide
Info
Note the holding lug of the brake line guide.
–
Mount brake disc guard
–
Install the wheel/wheels. (
–
Check the toe. (
301500-11
–
Remove the wheel carrier. (
M10x1.25
.
M8
20 Nm
(14.8 lbf ft)
and secure it with cable clamp
.
p. 73)
p. 191)
p. 194)
198
.
45 Nm
(33.2 lbf ft)
Loctite
243™
®
.