Removing The Torque Limiter; Positioning The Engine At Ignition Top Dead Center (Tdc) - KTM 450 SX ATV 2010 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the torque limiter

18.9

Positioning the engine at ignition top dead center (TDC)

18.10
–
Remove centering pins
301606-10
–
Remove torque limiter
301607-10
–
Remove screw
301608-10
–
Turn the crankshaft counterclockwise until holes
above sealing area
301609-10
–
Mark the double wheel and the cylinder head in one line.
Info
The markings will be of assistant when the camshafts are assembled.
301610-10
. Take off the alternator cover gasket

.

.

.

.

of the camshafts are flush

105