Rear Shock Absorber - Disassembling The Piston Rod - KTM 450 SX ATV 2010 Repair Manual

04/SHOCK ABSORBER, SWINGARM

Rear shock absorber - disassembling the piston rod

8.31
–
Remove compression damping adjuster
201055-10
–
Disassemble the damper of the rear shock absorber. (
–
Clamp the piston rod into a vise.
–
Remove nut
–
Remove rebound shim stack
201063-10
–
Remove piston
–
Remove compression shim stack
Info
Thread the compression shim stack onto a screwdriver and set them down
together.
201064-10
–
Remove sleeve
–
Remove rebound shim stack
Info
Thread the rebound shim stack onto a screwdriver and set them down
together.
201065-10
–
Remove piston
–
Remove compression shim stack
Info
Thread the compression shim stack onto a screwdriver and set them down
together.
201066-10
–
Remove rebound washer
–
Remove seal ring retainer
201067-10

.

.

.

.

.

.

.

.

.

.

. Remove the spring and piston.
p. 45)
46