Installing The Centrifugal Separator; Installing The Force Pump - KTM 450 SX ATV 2010 Repair Manual

30/ENGINE ASSEMBLY

Installing the centrifugal separator

20.11

Installing the force pump

20.12
–
Position oil pump gear
–
Position washers
–
Mount shaft locking devices
–
Crank the oil pump gear and ensure that it can move easily.
301656-11
–
Mount the needle roller.
–
Insert suction pump
301659-11
–
Mount centrifugal separator
301655-10
–
Mount oil pump housing
Info
Ensure that the dowel pins are seated properly.
–
Insert needle roller
301651-11
–
Position force pump
Info
Ensure that the dowel pins are seated properly.
301659-12
and oil pump idler gear

.

.

.

.

with the gasket.

.

.

with the bearing.

148