30/Engine Assembly; Installing The Crankshaft; Installing The Transmission Shafts; Installing The Shift Forks - KTM 450 SX ATV 2010 Repair Manual

30/ENGINE ASSEMBLY

Installing the crankshaft

20.1

Installing the transmission shafts

20.2

Installing the shift forks

20.3
–
Position the right section of the engine case in the engine work stand.
–
Push crankshaft
301697-10
–
Slide both transmission shafts into the bearing seats.
Info
Do not misplace the washers.
301696-10
–
Mount lock ring
301695-10
–
Shift fork

main shaft.
–
Mount shift fork
–
Mount shift fork
–
Slide on shift rollers
Tip
Fix the shift rollers to the shift forks with grease.
Markings In of shift forks
301694-10
into the bearing seat.

.

has a smaller inside diameter; mount this in the shift groove of the
in the lower shift groove of the countershaft.

in the upper shift groove of the countershaft.

.

and
 
face each other
145