33/TRANSMISSION
Removing the engine sprocket
23.1
Installing the engine sprocket
23.2
–
Disconnect plug
–
Remove screws
301543-10
–
Activate the rear brake and remove screw
–
Pull engine sprocket
sprocket.
301542-10
–
Insert engine sprocket
onto the countershaft together.
–
Activate the rear brake. Mount and tighten screw
Guideline
Screw, engine sprocket
301542-11
–
Position the engine sprocket cover. Mount and tighten screws
Guideline
Screw, clutch slave cylinder
Remaining screws, chassis
–
Connect plug
301543-11
of the brake light switch.
and
. Take off the engine sprocket cover.
off the countershaft with chain
into chain
with the collar facing the engine and slide
M10
of the brake light switch.
with spring washer
.
. Remove the engine
with spring washer
60 Nm
Loctite
®
(44.3 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
M8
25 Nm
(18.4 lbf ft)
179
.
243™