04/SHOCK ABSORBER, SWINGARM
Rear shock absorber - disassembling the damper
8.30
–
Remove sleeve
–
Remove spring
201048-10
–
Remove the spring from the rear shock absorber. (
–
Note down the present state of rebound damping
–
Completely open the adjusters of the rebound and compression damping.
201050-11
–
Remove rubber cap
–
Slowly open screw
The pressurized nitrogen is bled off.
201051-10
–
Remove screw
201052-10
–
Remove locking cap
–
Press in seal ring retainer
–
Remove lock ring
Info
Do not scratch the inner surface.
201053-10
–
Remove the piston rod. Drain the remaining oil.
–
Remove adjusting ring
201054-10
.
with washer
.
of the reservoir.
.
. Let the oil drain out.
.
.
.
with the intermediate washer and retaining ring
p. 44)
and compression damping
.
45
.