04/SHOCK ABSORBER, SWINGARM
Front shock absorber - disassembling the piston rod
8.12
–
Remove the piston rod. Drain the oil.
201136-10
–
Remove compression damping
201137-10
–
Disassemble the damper of the front shock absorber. (
–
Clamp the piston rod with the heim joint in a bench vise.
–
Remove nut
–
Remove supporting plate
201139-10
–
Remove rebound shim stack
Info
Thread the rebound shim stack onto a screwdriver and set them down
together.
–
Remove piston
201140-10
–
Remove compression shim stack
Info
Thread the compression shim stack onto a screwdriver and set them down
together.
201141-10
–
Remove seal ring retainer
–
Remove locking cap
200924-10
. Remove the spring and piston.
.
.
.
.
with bushing
.
and rubber buffer
p. 28)
.
.
29