Installing The Torque Limiter; Installing The Alternator Cover; Installing The Starter Motor; Installing The Valve Cover - KTM 450 SX ATV 2010 Repair Manual

30/ENGINE ASSEMBLY

Installing the torque limiter

20.32

Installing the alternator cover

20.33

Installing the starter motor

20.34

Installing the valve cover

20.35
–
Mount torque limiter
301607-10
–
Mount centering pins
301606-11
–
Position the alternator cover. Mount screws
Guideline
Screw, alternator cover
301605-11
–
Grease the O-ring. Position the starter motor.
Long-life grease (
–
Mount and tighten screws
Guideline
Screw, starter motor
301604-10
–
Position the valve cover with the gasket. Mount and tighten screws
Guideline
Screw, valve cover
301603-10
.

. Position alternator cover gasket

and tighten in a crisscross pattern.

M6
p. 225)
.

M6
M6
159
.

10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.

8 Nm (5.9 lbf ft)