Table of Contents
Advertisement
09/FRONT WHEEL
Installing the wheel/wheels
13.4
Note
Material damage Damage and destruction of components from incorrect positioning and mounting.
–
Do not swap the wheels; the tire valves must always be on the outside when the wheels are positioned and mounted.
Info
Proceed in the same way on the other wheels if necessary.
–
Loosen the wheel nuts
–
Jack up the vehicle. (
–
Remove the wheel nuts. Remove the wheel.
Info
Carefully remove the wheel, making sure it does not become jammed with
the threads of the screws.
300278-10
–
Position the wheel on the hub.
Info
Note the direction of travel of the front wheels.
Carefully position the wheel on the hub, being careful not to damage the
threads of the screws.
–
Mount wheel nuts
–
Remove the vehicle from the work stand. (
–
Pull the hand brake lever, push the locking pawl
brake lever. (Figure 301776-10
–
Tighten the wheel nuts crosswise.
Guideline
Wheel nut
300278-10
.
p. 12)
but do not tighten.
p. 12)
p. 88)
M10x1.25
down and release the hand
45 Nm
(33.2 lbf ft)
73
Advertisement
Table of Contents
