08/MASK, FENDER
Removing the front cover
12.3
Installing the front cover
12.4
Removing the front trim
12.5
–
Remove screw
–
Slide the front cover up and remove it.
301811-10
–
Position the front cover in slots
–
Mount and tighten the screw.
301812-10
–
Remove the front cover. (
–
Remove screws
–
Raise the front trim and disconnect the plug-in connector from the emergency OFF
switch with the rip cord.
–
Remove the front trim.
301820-10
.
on both sides of the front trim.
p. 69)
.
69