Removing The Water Pump Cover; Removing The Clutch Cover - KTM 450 SX ATV 2010 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the water pump cover

18.15

Removing the clutch cover

18.16
–
Remove centering pins
301621-10
–
Remove screws
–
Remove the gasket.
301622-10
–
Remove screw
Info
If work is to be performed on the water pump, unscrew the nut of the water
pump impeller.
301623-10
–
Mount special tool
Assembly pin (77329012100) (
–
Remove screws
301624-10
–
Remove the locating pins.
–
Remove quad ring
–
Take off O-ring
301625-10
and cylinder head gasket

. Take off the water pump cover.

.

.

p. 231)
and take off the clutch cover.

.

.

108
.
