30/ENGINE
Removing the engine
17.1
–
Remove the engine guard. (
–
Remove the heel protector. (
–
Drain the coolant. (
–
Remove the rear fender. (
–
Remove the manifold. (
–
Remove the carburetor. (
–
Remove the engine sprocket. (
–
Disconnect the negative cable from the battery.
–
Remove screws
Info
Do not activate the clutch lever if the clutch slave cylinder has been
removed.
301583-10
–
Remove cable binder
301584-10
–
Disconnect plug
–
Disconnect plug
–
Detach spark plug connector
301585-10
–
Remove screw
–
Slide back the cover. Remove nut
motor and detach the cable.
301586-10
–
Loosen hose clips
301587-10
p. 20)
p. 67)
p. 181)
p. 70)
p. 60)
p. 164)
p. 179)
and take off clutch slave cylinder
.
of the alternator.
of the ignition pulse generator.
.
. Hang the ground wire to the side.
from the electrical connection on the starter
and remove the radiator hoses and hose clips.
99
.