Table of Contents
Advertisement
Troubleshooting
Step 3. Checking default status
The original position of the bracket is fixed at the center hole (In the production line, a screw is fasten at
the center hole). If excessive skew does show on the image, it is possible to improve the skew quality by
repositioning the bracket.
NOTE
The default position of the bracket ensures the image skew well within the designed spec. If the copied
output is satisfactory, it is recommended to keep the default position and do not adjust the skew further.
Slit Hole
Center Hole
Scale
A screw fasten to the center hole.
4-215
Advertisement
Table of Contents
Troubleshooting
