Samsung CLX-8540ND Service Manual page 247

● Code : 01-010
● Symptom : Paper jam in exit area
● Possible Cause:
- If there is no jammed paper but error has occurred at warm-up, exit sensor is defective.
● Troubleshooting method :
Exit Sensor
Troubleshooting
● Error message : Paper jam in exit area
1. Execute the Exit Sensor test.
(EDC Mode Test Routines
Engine/DADF Test Routine
Check Status Stop)
2. Check if the Harness is defective.
Check if the connector is connected properly.
4-85
Copier
102-370 Start