Table of Contents
Advertisement
Troubleshooting
● Code : 10-006
● Error message : Communication problem occurred with scanner unit
● Symptom : Communication error occurred with scanner board.
● Possible Cause : Communication error occurred with scanner board.
● Troubleshooting method :
1. Check if the DADF connector is connected properly. Reconnect it.
< DADF Connector >
2. If the connection has no problem, replace the DADF board. (
)
Refer to 3.2.2.2 DADF in chapter 3
3. If the problem persists after replacing the DADF, replace the video board.
4-138
Advertisement
Table of Contents
Troubleshooting
