Table of Contents
Advertisement
● Code :07-009
● Symptom : Front Jogger does not work.
● Possible Cause: Front Jogger Home Sensor defect, Front Jogger Motor defect, Finisher main board
defect.
● Troubleshooting method :
1. Check if the Finisher cable is connected to the
machine.
2. Open the finisher bottom cover and check the LED
on the finisher main board.
At that time, all finisher doors must be closed.
Check if the red, yellow, green LED are on.
3. If the yellow LED is not on, check the connection of
the switch in the Finisher Front Door.
Troubleshooting
● Error message : Finisher error: #07-009. Please turn off then on
4. Check if the finisher front jogger home sensor harness
is connected properly.
5. Check if the finisher front jogger motor harness is
connected properly.
6. Check if the front jogger shaft is contaminated.
7. If the problem persists, replace the finisher main board.
4-121
Advertisement
Table of Contents
Troubleshooting
