Samsung CLX-8540ND Service Manual page 207

NVM Description
Code
(GUI)
05-110 DADF Bottom Edge
Erase
05-500 Platen Top Edge Erase
05-510 Platen Bottom Edge
Erase
05-700 ADF Roller Life Page
Counter
05-710 ADF Rubber Pad Life
Page Counter
Service Manual
Troubleshooting
Max
Default
/ Min
2 4/0 * This value sets the Bottom Skip at DADF Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Bottom Skip at DADF copy increases.
* In case, the value is less than 2 :
Bottom Skip at DADF copy decreases.
2 4/0 * This value sets the Top Skip at Platen Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Top Skip at Platen copy increases.
* In case, the value is less than 2 :
Top Skip at Platen copy decreases.
2 4/0 * This value sets the Bottom Skip at Platen Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Bottom Skip at Platen copy increases.
* In case, the value is less than 2 :
Bottom Skip at Platen copy decreases.
0 100000 * DADF Pick up roller Page Counter
/0 * When replacing a svc part, you can change the count to 0.
0 100000 * DADF Rubber Pad Page Counter
/0 * When replacing a svc part, you can change the count to 0.
4-45
Function Description
Samsung Electronics