Samsung CLX-8540ND Service Manual page 281

Digital color laser mfp

Hide thumbs Also See for CLX-8540ND:

Table of Contents

Troubleshooting

● Code : 07-007

● Error message : Finisher error: #07-007. Please turn off then on

● Symptom : Finisher does not work because of communication error between finisher and engine.

● Possible Cause: Interface Cable connection error, Interface Cable defect, Finisher Main Board defect

● Troubleshooting method :

1. Check the Finisher I/F Cable is connected properly. Reconnect it.

2. If the problem persists, replace the Interface Cable.

3. If the problem persists, replace the finisher main board.

Troubleshooting