Samsung CLX-8540ND Service Manual page 147

19. Unplug all connector on board. Remove 3
screws and 3 fixer. And release the PBA.
20. To remove the Finisher connector, remove 2
screws.
21. Release the finisher connector after removing 1
screw.
[G]
[G] [G]
[G] [G]
[G]
Service Manual
Maintenance and Disassembly
22. Unplug 2 connectors. Remove 3 screws.
And release the stapler unit.
23. Remove 2 screw. Unplug the connector.
And remove the motor unit.
24. Release the bracket rear cover after removing
2 screws.
3-68
Samsung Electronics