Table of Contents
Advertisement
● Code : 07-006
● Symptom : Finisher could not be supplied with 24V power. So finisher has stopped.
● Possible Cause :
Some covers of the finisher and mail box are not closed.
Finisher and mail box cover S/W harness is not connected properly.
Finisher Jam door sensor is broken.
Finisher main board is broken.
● Troubleshooting method :
1. Check if all cover of the Finisher and Mailbox is opened. Close all covers perfectly.
2. If the problem persists, check if the finisher cover S/W harness is connected and operated properly.
3. Check if the Finisher jam door sensor harness is connected properly.
Check if the Finisher jam door flag is broken.
4. Check if the Mailbox door S/W harness is connected properly.
Check if the Mailbox cover flag is broken.
5. If the problem persists, replace the finisher main board.
Troubleshooting
● Error message : Finisher door is open. Close it
4-118
Advertisement
Table of Contents
Troubleshooting
