Table of Contents
Advertisement
● Code : 07-001
53-004
● Symptom : Feed motor and exit motor have stopped for initialization or printing job.
● Possible Cause: Gate sensor defect , Feed motor defect, Finisher main board defect
● Troubleshooting method :
1. Check if the Finisher cable is connected to the machine.
2. Open the finisher bottom cover and check the LED on the finisher main board.
At that time, all finisher doors must be closed.
Check if the red, yellow, green LED are on.
3. If the yellow LED is not on, check the connection of the switch in the Finisher Front Door.
Troubleshooting
● Error message : Paper jam inside of finisher
4-113
To be continued on next page...
Advertisement
Table of Contents
Troubleshooting
