Table of Contents
Advertisement
● Code : L-2
● Troubleshooting method :
6. Check if the HV contact point on imaging unit is contaminated.
7. If the problem persists, replace the HVPS-L, HVPS-S
< HVPS-L PBA>
8. If the problem persists, replace the harness between HVPS and imaging unit.
And measure the resistance between ground shield and High voltage output connector.
9. If the problem persists, replace the engine board
Troubleshooting
● Vertical Random Streak 3/3
< HVPS-S PBA >
video board
LSU in order.
4-201
Advertisement
Table of Contents
Troubleshooting
