Table of Contents
Advertisement
● Code : T-2
● Symptom :
-. Offset Image (After-image on OPC)
● Possible Cause:
1. Environment recognition sensor defect.
2. High voltage output error by HVPS defect.
● Troubleshooting method :
1) Check if there are heat, cold wind by heater or air-conditioner. These things make the
environment recognition sensor get wrong information. In this case, move the machine in
proper place.
2) Replace the environment recognition sensor.
3) If the problem persists, replace the HVPS-L.
4) If the problem persists, replace the HVPS-S.
Troubleshooting
● Offset Image 2/2
4-207
Advertisement
Table of Contents
Troubleshooting
