Table of Contents
Advertisement
Troubleshooting
● Code : 07-005
● Error message : Staple cartridge is not installed. Install it in finisher
07-015
Staple cartridge is empty. Replace it
● Symptom : Stapler does not work.
● Possible Cause: Stapler harness defect, Staple cartridge set sensor defect, Finisher Main Board defect
● Troubleshooting method :
1. Check if the stapler harness is connected properly.
2. Check if the staple cartridge is installed properly.
3. Check if the staple cartridge set sensor is operated properly.
4. If the problem persists, replace the finisher main board.
4-117
Advertisement
Table of Contents
Troubleshooting
