Table of Contents
Advertisement
● Code : 12-002
● Symptom :
The paper in tray is not proper.
● Possible Cause:
1. Check the harness and connector of the Tray3 Size1/2/3 Sensor.
2. Tray3 Size1/2/3 Sensor is defective.
● Troubleshooting method :
Troubleshooting
● Error message : Load tray 3 with [Letter], [Plain] paper
1
2
3
1. Check if the Harness is defective.
Check if the connector is connected properly.
.
2. Enter the EDC mode. Execute the tray3 Size1/2/3
Sensor test.
(EDC Mode
Test Routines
Test Routine
102-160 (170, 040)
Operation Check
Stop)
4-142
Copier Engine/DADF
Start
Advertisement
Table of Contents
Troubleshooting
