Troubleshooting
● Code :08-002
● Error message : Original paper jam inside of scanner
● Symptom :
The lead edge of the document has not reached to scan sensor after being sensed by the regi sensor.
● Possible Cause :
1. Gate sensor or actuator is defective.
2. Document paper path is contaminated.
3. WHITE BAR SHEET is not attached properly.
4. WHITE BAR is defective.
● Troubleshooting method :
1. Check if the gate sensor is operated properly. (service Manual 2.3.3.7 Sensor 51,53)
2. Check if the WHITE BAR SHEET is attached properly.
White Bar
3. In case that the document is jammed between white bar and glass, check if the WHITE BAR get curved.
4. Check if the document paper path is contaminated.
4-129