Table of Contents
Advertisement
● Code : L-2
● Troubleshooting method :
3. Check if the T2 roller is installed properly. Re-install or replace the T2 roller.
① Open the SIDE COVER.
③ Remove the T2 roller.
4. Enter the EDC mode. Execute 'T2 Engage/Disengage' test to check if T2 Cam is operated properly.
5. If the problem persists, replace the fuser unit.
Troubleshooting
● Vertical Random Streak 2/3
② Remove the Guide.
④ Check the T2 Roller contact point.
4-200
Advertisement
Table of Contents
Troubleshooting
