Table of Contents
Advertisement
3.2.2.2 DADF Unit
1. Remove 3 screws, and disassemble the DADF
harness cover.
2. Remove the bracket by using a tool such as
tweezers.
Unplug the harness.
Service Manual
Maintenance and Disassembly
3. Make the DADF unit stand at an angle of 45
degrees and lift up and separate it.
4. Open the DADF cover, and remove the one
screw.
5. Lift up the stacker, and remove the two screws.
3-35
Samsung Electronics
Advertisement
Table of Contents
Troubleshooting
