Table of Contents
Advertisement
Troubleshooting
• Edit
"Edit" button is disabled until user select one item in the list.
Selecting "Edit" button causes edit window to be displayed.
There are two input filed for 'Maximum Life' and for 'Threshold'.
Each data field shall display default value or the last-saved value entered by the service engineer. The data
field shall support the numeric characters of 0 to 9.
The hard keypad characters of '#', 'phone' and '*' are not supported and shall generate an invalid entry
message if selected.
The hard keypad characters of 'c' shall delete all characters displayed within the selected data field. By
selecting 'Cancel', window moves back to HSFI window without saving user's setting. By selecting 'OK'
button, window moves back to HSFI window saving user's setting. Threshold value shall not be greater than
Maximum Life.
Software Version
• Diagnostics>Information>Software Version
• When user selects Software version, OP displays the version of the Main Controller, Image Output Terminal,
User Interface, Network Controller, Document Feeder, Tray 2 Firmware, Tray 3 Firmware
4-27
Service Manual
Samsung Electronics
Advertisement
Table of Contents
Troubleshooting
