Table of Contents
Advertisement
● Code :
21-016
21-024
● Symptom :
Tray2 (3 or HCF) is installed but not detected.
● Possible Cause:
IF_Under connector is defective.
● Troubleshooting method :
1. Check if the IF_Under connector on the engine board is connected properly.
2. Check if the IF_Under connector on the tray2 (3 or HCF) board is connected properly.
3. Check if the connector between the machine and the tray2 (3 or HCF) is connected properly.
Troubleshooting
● Error message :
Tray2 is not installed
Tray3 is not installed
4-151
Advertisement
Table of Contents
Troubleshooting
