Table of Contents
Advertisement
● Code : 07-008
● Symptom : Main Paddle does not work.
● Possible Cause: Paddle Home Sensor defect, Paddle motor defect , Main board defect
● Troubleshooting method :
1. Check if the Finisher cable is connected to the
machine.
2. Open the finisher bottom cover and check the
LED on the finisher main board.
At that time, all finisher doors must be closed.
Check if the red, yellow, green LED are on.
3. If the yellow LED is not on, check the
connection of the switch in the Finisher Front Door.
Troubleshooting
● Error message : Finisher error: #07-008. Please turn off then on
4. Check it the finisher paddle home sensor
harness is connected properly.
5. Check if the paddle motor harness is connected
properly.
6. Check if the compile separate cam is operated
properly.
7. If the problem persists, replace the finisher main
board.
4-120
Advertisement
Table of Contents
Troubleshooting
