Table of Contents
Advertisement
● Code : 01-002
● Symptom : Tray3 door is opened.
● Possible Cause:
1. Harness is defective, Connector is not connected properly.
2. Sensor is defective.
● Troubleshooting method :
1. Remove the Tray3 Cover.
2. Check if the Harness is defective.
Check if the connector is connected properly.
3. Check if the UI message on panel is changed.
Troubleshooting
● Error message : Tray 3 door is open. Close it
4-74
Advertisement
Table of Contents
Troubleshooting
