Table of Contents
Advertisement
● Code :07-014
● Symptom : Stack Unit does not work.
● Possible Cause: Stacker Upper Limit sensor defect, Stack Full sensor defect, Stack Lower S/W defect,
Stacker Motor defect, Finisher Main Board defect.
● Troubleshooting method :
1. Check if the Finisher cable is connected to the machine.
2. Open the finisher bottom cover and check the LED on the finisher main board.
At that time, all finisher doors must be closed.
Check if the red, yellow, green LED are on.
3. If the yellow LED is not on, check the connection of the switch in the Finisher Front Door.
Troubleshooting
● Error message : Finisher error: #07-014. Please turn off then on
4-126
To be continued on next page...
Advertisement
Table of Contents
Troubleshooting
