Table of Contents
Advertisement
10. Separate the bracket and main board after
remove 5 screws.
11. Remove the SPUR Gear after remove screw.
12. There are 3 Assy actuator shield. This manual
describes disassembly procedure for middle
shield. Remove 2 screws (green color) from the
front.
Service Manual
Maintenance and Disassembly
13. Remove 2 screws (green color) from the rear.
14. Remove the ROLLER:STACKER.
15. Remove the SEPARATE:PAWL:FEED by
unhooking the side.
3-72
Samsung Electronics
Advertisement
Table of Contents
Troubleshooting
