Network Configuration - Comtech EF Data CDM-625A Installation And Operation Manual

NETWORK CONFIGURATION

K.1 Introduction
The CDM-625A Advanced Satellite Modem's handling of Ethernet terrestrial traffic data differs
depending on whether the optional IP Packet Processor is either not installed or installed but
disabled; or when the optional IP Packet Processor is installed and enabled .
Appendix L. IP PACKET PROCESSOR OPTION
This chapter explains the CDM-625A's Ethernet interface and illustrates the functional
differences between the available operating modes. Additional modes of operation are also
explained.
K.2 CDM-625A Ethernet Overview
K.2.1 Interface Architecture
Appendix K. ETHERNET
Figure 16-1. CDM-625A Ethernet Architecture Design
K–1