Utilities: Led; Utilities: Redundancy  Traffic-Ip-Addr/Range; Utilities: Redundancy  1:N - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
6.2.6.4

Utilities: LED

Front Panel LED Test: Enabled
Use the arrow keys to select Enable or Disable, and then press ENTER to continue. When
▲▼
enabled, a test of all of the LEDs on the front panel is executed. Normal operations resume upon
completion of the test.
6.2.6.5 Utilities: Redundancy
Redundancy:
Traffic-IP-Addr/Range
Use the arrow keys to select Traffic-IP-Addr/Range, 1:1, or 1:N, and then press ENTER.
▲▼
6.2.6.5.1 Utilities: Redundancy  Traffic-IP-Addr/Range
Traffic IP address/Range
192.168.001.001/24
To edit the Traffic IP Address and range, when the modem is part of a 1:1 or 1:N redundancy
application: First, use the
keys to change that digit. Press ENTER when done.
6.2.6.5.2 Utilities: Redundancy  1:1
Press ENTER key to force Unit into
Standby (1:1 only)
For use when the modem is part of a 1:1 redundancy application (e.g., via a CRS-170A L-Band or
CRS-180 70/140 MHz 1:1 Redundancy Switch) and this unit is currently Online, press ENTER to
cause the unit to switch to Standby (i.e., go Offline).
6.2.6.5.3 Utilities: Redundancy  1:N
1:N Mode:
For use when the unit is part of a 1:N redundant application (e.g., via a CRS-300 1:10
Redundancy Switch). Use the
Disable, and then press ENTER.
(Enable,Disable)
◄ ► arrow keys to select a digit to edit, and then use the
Disabled (Enable, Disable)
arrow keys to select 1:N Mode operation as Enable or
▲▼
1:1 1:N
(use with CAUTION!)
6–84
Revision 0
MN-CDM625A
()
()
▲▼
()
arrow