Odu: Fsk-Control  2Csats; Odu: Fsk-Control  2Csats  Csat#X; Odu: Fsk-Control  2Csats  Redundancy-Box - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  LNA
Info:
Use this screen to view the Low Noise Amplifier operational settings.
10.3.3.3.3.2 ODU: FSK-control  2CSATs
The menus that follow assume that you have selected and the system has identified
two CSATs connected via the Rx IF port and the ODU Redundancy Controller Box.
1:1 Monitor & Control
CSAT#1
◄ ► arrow keys to select CSAT#1, CSAT#2, or Redundancy-Box, and then press ENTER.
Use the
ODU: FSK-control  2CSATs  CSAT#X
10.3.3.3.3.2.1
This submenu and its nested menus are identical in form and function for the
following menu structures:
ODU: FSK-control
ODU: FSK-control
CSAT-5060/050 V1.02
Configuration
Use the ◄ ► arrow keys to select Configuration, Monitor, Alarms, or Info, and then press
ENTER.
Sect. 10.3.3.3.3.1 ODU: FSK-control
nested menu choices.
ODU: FSK-control  2CSATs  Redundancy-Box
10.3.3.3.3.2.2
Red: Online: ODU2
TxSw:OK
This menu provides operating mode and switchover controls. You may also view the following
read-only information here:
•
Which of the two CSATs in currently online (ODU1 or ODU2);
LNA:Off Fault-Logic:Summary
Window:48%
CSAT#2 Redundancy-Box
 CSAT 
 2CSATs  CSAT#X
Monitor
Mode:Auto
RxSw:OK 5V:5.0
10–21
()
(where CSAT#X = CSAT#1, CSAT#2)

Alarms Info ()
CSAT for complete information for these

Switch:N
12V:12.0
Revision 0
MN-CDM625A
(EC)